Sound Design - Stage $40 initial, $8 / hour

Sound design is one of the youngest fields in technical theatre, second only to the use of projection and other multimedia displays. The idea of sound design has been around since theatre started, however the first person titled the "sound designer" on Broadway was given to Jack Mann for his work on Show Girl in 1963 [1], and for regional theatre to Dan Dugan at the American Conservatory Theatre (ACT), San Francisco in the late 1960s. Since then the field has been growing rapidly.

Currently it can be said that there are two variants of Theatrical Sound Design. Both are equally important, but very different, though their functions usually overlap. Often a single Sound Designer will fill both these roles, and although on a large budget production they may work together, for the most part there is only one Sound Designer for a given production. Where such distinctions are made, the first variant is "Technical Sound Design" (which has also been termed Theatre Sound System Design by the United States Institute for Theatre Technology's (USITT) Sound Design Commission), which is prevalent on Broadway, and the second "Conceptual Sound Design" (which has also been termed Theatre Sound Score Design by the USITT), which is prevalent at Regional Repertory Theatres. Both variants were created during the 1960s. These terms are really examples only, and not generally used in practice since most Sound Designers simply call themselves Sound Designers, no matter which role they are filling primarily.

Technical Sound Design requires the sound designer to design the sound system that will fulfill the needs of the production. If there is a sound system already installed in the venue, it is their job to tune the system for the best use for the given production using various methods including equalization, delay, volume, speaker and microphone placement, and this may include the addition of equipment not already provided. In conjunction with the director and musical director, if any, they also determine the use and placement of microphones for actors and musicians. A Technical Sound Designer makes sure that the performance can be heard and understood by everyone in the audience, no matter how large the room, and that the performers can hear everything they need to in order to do their job.

Conceptual Sound Design is very different from technical sound design, but equally important. The designer must first read the play and talk to the production's Director about what themes and messages they want to explore. It is here that, in conjunction with the director and possibly the composer, the designer decides what sounds he will use to create mood and setting of the play. He might also choose or compose specific music for the play, although the final choice typically lies with the director, who may want nothing but scene change music or, on the other extreme, will want ambient beds under every scene.

On occasion, the director may be very hands-on and will tell the sound designer what sounds to use and where to play them. In such cases, the sound designer becomes little more than an audio editor, but this depends to a large degree on the director and his relationship and level of trust with the sound designer. Also, the Conceptual Sound Designer must build the "prop sounds" (telephones rings, answering machines, announcements etc.) and figure out how to fit them into the established themes with regard to when and where the action is supposed to be taking place. For example, using a modern cellular phone ringtone would be out of place for a phone ringing in the 1940's. A Conceptual Sound Designer uses sound to enhance the audience's experience by conveying specific emotion or information without using words.

Above all, both the Technical Sound Designer and the Conceptual Sound Designer must call on experience and "uncommon" sense to ensure that the sound is contributing constructively to the production and is in harmony with the work of the actors and other designers.

source Wikipedia